Skräddarsydd industri & labbteknik

Från applikation till funktion

0 produkter / 0,00kr

Till varukorgen-ikon

0

Hem / Produkter / Klimatsimulering / Klimattestning / Produkttestning / Klimatskåp / Klimatkammare / Mindre bänkmodeller / TH3-KE-serien klimatskåp 25-100 liter, -35°C till +150°C, 20-95 % RH

Performance
• Microprocessor PID control / Temperature calibration / Automatic tuning.
• Uniform temperature and humidity control guarantees reliable test result.
• Air-tight door closure with perfect sealed packing.
- Heat-resistant silicone packing completely blocks high heat leakage from the inner chamber.
• Maintenance of water supply is easily performed.
- Water level condition is easy to check by the water level indicator on the front control panel.
• Water supply during operation is also available for long term test purposes.
• Direct water system provides user great convenience when performing long-term tests. (optional)

Convenience
• Compact design and quiet operation.
• Three different size models are available to suit user’s need.
• Corrosion resistance stainless steel chamber.
• Operating condition is clearly noticed by front LED indicator.
- Three different colored lights show each status of running, stop, and power off condition.
• Clear observation of samples.
- Tempered glass window with wire heater and lighting provides a clear view of samples in the chamber, beneficial for during testing.
• Cable port for introduction of external probes or wires.
- 50mm diameter cable port comes standard on the left side of the unit.
- Additional 50mm or 80mm diameter cable ports, custom ordered. (optional)
• Two type of stands for space-saving. (optional)
- Single stand with a drawer provides enough storage space.
- Two step stand accepts loading two units to save limited space.
• User friendly LCD controller.
- Set value and present value are clearly visible together on display.
- Operating progress visible in graph mode allow for direct data interpretation.
- Temperature and other operating parameters recorded with use of selectable recorder. (optional)
• Sufficient programmable control support.
- Programmable pattern capacity: 10
- pattern repeat: 999
- Max. Segments per a pattern: 100
- Available max. segments*: 100
- Programmable process time per a segment: 0 to 99 hr. 59 min.
* Even though the max. segments per a pattern are 100, available total segments are up to 300 not 3000, so you need to arrange the number of segment and patterns properly
• Computer interface.
- RS-485 communication port enables connection of up to maximum 9 units. Simultaneous monitoring and operating of multiple units is an available feature. (optional)
- Program patterns are simple to set with the use of our software.
- Storage of program information, backup of value settings, recovery, temperature, humidity values.
- RS-232 communication port comes standard.

Safety

• Built in door lock with a key.
• Automatic shut off after overheat alarm.
• Low and empty water level alarm.
• Power supply leakage breaker.
• Over current protection.
• Open door alarm.

Tillbehör / relaterade produkter

Inga produkter hittades

Kontakta oss för för offert och personlig rådlivning!

För våra mer avancerade produkter vill vi hålla personlig dialog och skriva personliga offerter för att ni ska kunna vara så trygga i er investering som möjligt. 

Klicka på knappen för offertförfrågan ovan och fyll i era uppgifter så återkommer vi snarast, eller kontakta oss direkt:

E-post: mail@milmedtek.se
Telefon: 0455-332 770

Telefontid 08.00-16.30

Leasing anpassad för er:

Vi erbjuder fördelaktiga leasingalternativ via Wasa Kredit för att sprida ut investeringen under ett par års tid. Köp den därefter för restvärdet (normalt 5 % av normalt inköpspris). Kontakta oss!

Kontakta oss / Information

MILMEDTEK AB  |  Tennvägen 1, 371 50 Karlskrona  |  E-post: mail@milmedtek.se

Telefon: +46 455 332 770

Milmedtek hanterar personuppgifter i enlighet med gällande lagstiftning GDPR, se vår integritetspolicy här: Integritetspolicy

© Milmedtek AB  2024 |  » Om cookies