0 produkter / 0,00kr

Till varukorgen-ikon

0

Hem / Produkter / Klimatkammare / Klimatkammare - Golvstående modeller / TH-I-serien klimatkammare 180-408 liter, -40°C till +150°C, 20-95 % RH

Performance

• Microprocessor PID control / Temperature calibration / Automatic tuning.
• Advanced performance of low and high temperature and humidity control, achieved by adapting the humidification tank exterior to the chamber, added benefit for long term test.
• Water recycling and filtering system reduce water consumption for longer operation.
• Air-tight door closure with perfect sealed packing.
- Heat-resistant silicone packing completely blocks high heat leakage from the inner chamber.
- Two-point door latch also enhances tightness to door closure.
• Energy efficiency is achieved by optimization of the insulation system.
- Even if the unit is operating at max. temperature, the surface of the unit doesn’t allow high temperatures of over 60℃.

Convenience

• Three different volume sizes are available to suit any users’needs.
• Corrosion resistance stainless steel chamber and electric polished humidification tank.
• Maintenance of water supply are easily performed with a front water tank.
- Portable water container makes supplying water convenient.
• Water supply during operation is also available for long term test purposes.
• Direct water system provides user great convenience when performing long-term tests. (optional)
• Clear observation of samples.
- Tempered glass door with built in heating wire.
- Energy efficient, long life span LED lighting.
- Wider view, inner glass door is available for monitoring of samples. (optional)
• Cable port for introduction of external probes or wires.
- 50mm diameter cable port comes standard on the left side of the unit.
- Additional 50mm or 80mm diameter cable ports, custom ordered. (optional)
• Casters for easy mobility during installation or relocation.
• User friendly LCD controller.
- 5.7 inch colorful interactive touch type LCD controller.
- Set value and present value are clearly visible together on display.
- Operating progress visible in graph mode allow for direct data interpretation.
- Built-in SD card drive.
- Trilingual support. (English / Chinese / Korean)
- Temperature and other operating parameters recorded with use of an selectable recorder. (optional)
- Sufficient programmable control support.
- Programmable pattern capacity: 120
- Pattern repeat time: 999
- Max. segments per a pattern: 100
- Available max. segments*: 1200
- Programmable process time per a segment: 0 to 999hr, 59 min 59 sec
* Even though the max. segments per a pattern are 100, available total segments are up to 1200 not 12000, so you need to arrange the number of segment an patterns properly.
• Computer interface.
- RS-485 communication port enables connection of up to maximum 9 units. Simultaneous monitoring and operating of multiple units is an available feature. (optional)
- Program patterns are simple to set with the use of our software.
- Storage of program information, backup of value settings, recovery, temperature, humidity values.
- RS-232 communication port comes standard.

Safety

• Built in door lock with a key.
• Automatic shut off after overheat alarm.
• Low and empty water level alarm.
• Power supply leakage breaker.
• Over current protection.
• Open door alarm.

Tillbehör / relaterade produkter

Inga produkter hittades

Kontakta oss för för offert och personlig rådlivning!

För våra mer avancerade produkter vill vi hålla personlig dialog och skriva personliga offerter för att ni ska kunna vara så trygga i er investering som möjligt. 

Klicka på knappen för offertförfrågan ovan och fyll i era uppgifter så återkommer vi snarast, eller kontakta oss direkt:

E-post: mail@milmedtek.se
Telefon: 0455-332 770

Telefontid 08.00-16.30

Leasing anpassad för er:

Vi erbjuder fördelaktiga leasingalternativ via Wasa Kredit för att sprida ut investeringen under ett par års tid. Köp den därefter för restvärdet (normalt 5 % av normalt inköpspris). Kontakta oss!

Kontakta oss / Information

MILMEDTEK AB  |  Tennvägen 1, 371 50 Karlskrona
Fax: +46 455 332 671, Mail: mail@milmedtek.se

Telefon: +46 455 332 770

Milmedtek hanterar personuppgifter i enlighet med gällande lagstiftning GDPR, se vår integritetspolicy här: Integritetspolicy

© Milmedtek AB  2018 |  » Om cookies